Filter
Top Products
Acoustic noise:
Operating:
Approx. 65
dB
or less (Bystander position,
receipt/journal
printing)
In
terface
Specifications
Serial interface:
Parallel interface:
Note:
RS-232 compatible
IEEE 1284 compatible (Nibble/Byte Modes)
Refer
to
the
EPSON
TM-U375/U375P
Specification for details.
Printing on Cut Sheets
Use
the
following
procedure
to print on slip or validation paper.
Step
Host
Operation
Printer
Operation
1
Transmit the
ESC
c
0 Switches to cut sheet mode and waits for a cut sheet to
command.
be loaded, according to the time set by the
ESC
f
m
n
command. The VALIDATION/SLIP light blinks.
2
Insert the paper. Detects the cut sheet and turns on the
VALIDATION/SLIP light.
When using slip paper, detects the slip after the set
time
(t2)
has passed. If the slip is not detected, re-
enters the slip waiting state. When the slip paper is
detected, feeds the slip as far as the print start
position, then redetects the slip and waits for the
print data. If the slip is not detected after feeding
the paper, re-enters the slip waiting state.
When using validation paper, detects the paper after
the set time
(t2)
has passed. If the paper is not
detected, re-enters the validation paper waiting
state. When the validation paper is detected, waits
for the print data.
If no cut sheet is inserted within the set time
(t-1),
switches from cut sheet mode to paper roll mode
automatically.
3
Transmit data and Prints the data and feeds the paper.
commands.
4
Transmit the FF After printing, ejects the paper and selects paper roll
command.
mode. Turns off the VALIDATION/SLIP light.
4-8 Reference Information