Epson TM-U375 Printer User Manual


 
1.
Send the appropriate control commands from the computer to print on
validation paper.
2.When the VALIDATION/SLIP light flashes, insert a sheet of validation
paper into the validation paper inlet (see the illustration below);
printing will then begin.
Make sure you insert
the
validation paper into the inlet as far as it will go.
*
Qb
Note:
When
the
VALIDATION/SLIP light flashes (this depends on the
application software), remove
the
paper from
the
paper
path.
Replacing the Paper Roll
To change the paper roll, follow the steps below.
1.
Cut the journal paper on the cutter; then remove the take-up spool.
Using the Printer 2-5