Filter
Top Products
*
Qh
Notes:
1.
This function can be used only when a direct connection display
module is connected to the display module connector.
2..
DIP switch settings cannot be changed after the power is turned
on or
after
the printer is reset through the interface.
When
turning
the
power on, do not change
the
settings of DIP
switches
7 and 8.
TM-U375P DIP-switch functions
DIP Switch Set 1
SW Function
ON
1-1
Auto line feed
Enabled
OFF
Disabled
l-2 Receive buffer capacity
l-3 Undefined
l-4 Undefined
1-5 Undefined
1-6
Undefined
l-7 Undefined
l-8 Undefined
40 bytes
4K
bytes
DIP Switch Set 2
SW
Function
2-
1 Undefined
2-2 Print column selection
7
X
9 font/9
X
9 font
2-3 Handshaking (busy condition)
2-4 Reserved.
2-5
Settings must not be changed.
2-6
Settings must not be changed.
2-7 Undefined
2-8
nInit reset signal Fixed to ON.
ON OFF
42CPL/35CPL
40CPL/33CPL
Receive
Off-line or
buffer full
receive buffer full
A
CAUTION:
Do
not
change the settings
of
switch
2-4, 2-5,
2-6
and
2-8.
5.
Replace
the
DIP switch cover and secure it
with
the screw.
1-22 Setting
Up
the Printer