Filter
Top Products
26 Managing Color With Profiles
Selecting Print Settings and Printing
1. Click the Print button, select your printer, and click Properties or
Preferences.
2. Click the
Advanced tab.
3. If you are using an Epson Premium
ICC profile, set the print quality
setting to match your profile.
4. Select the
Type setting for your paper
(see page 22).
5. Turn off the
High Speed and Edge
Smoothing
options, if available.
6. Select the
ICM button under Color
Management
, then check the Off (No
Color Adjustment)
box.
Note:
Make sure that you select Off (No Color Adjustment). If you don’t, the printer
driver will apply additional correction to the image data, producing inaccurate
results.
7. If you are printing on any of the following glossy media, make sure the Gloss
checkbox is selected:
■ Ultra Premium Photo Paper Glossy
■ Premium Photo Paper Glossy
■ Premium Photo Paper Semi-gloss
■ Ultra Premium Photo Paper Luster
■ PremierArt Water Resistant Canvas
8. Click
OK, then click OK or Print to print your photo.
Note:
If you selected the wrong combination of source profile, printer profile, and color
management settings, you’ll get unexpected results. If your printed image is darker
than expected and/or has a strong yellow-brown cast, you probably turned off color
management in both Photoshop and the Epson printer driver. If your printed image is
lighter than expected and/or has a strong light blue cast, you probably turned on color
management in both Photoshop and the Epson printer driver.