Filter
Top Products
VIPER Technical Manual Introduction
© 2007 Eurotech Ltd Issue E 10
• CYCLOPS
The CYCLOPS is a rugged VIPER display terminal. The enclosure can be
configured to suit a complete range of embedded applications with LCD display
and touchscreen.
• VIPER-ICE (Industrial Compact Enclosure) development kits
The VIPER-ICE is a simple low cost aluminium enclosure, which provides easy
connection to all on board features. The enclosure includes the VIPER-UPS and
optionally a colour Q-VGA (320x240) TFT flat panel display and analogue
touchscreen. The VIPER-ICE is available with a wide range of development kits.
These are described in the section
236HDevelopment kits available for the VIPER, page
237H10. For further details, see 30Hwww.eurotech-ltd.co.uk/development-kits.htm.
Development kits available for the VIPER
• Windows CE/CE 5.0 development kit
Features of this kit are:
- 400MHz PXA255 processor with 64MB DRAM & 32MB Flash memory.
- Pre-configured build of Windows CE 5.0 tailored specifically for the VIPER, pre-
loaded into the 32MB Flash.
- Windows CE 5.0 Platform SDK for VIPER.
- Rugged enclosure with
31HNEC Q-VGA TFT colour 5.5 and display and analogue
touchscreen.
- Uninterruptible power supply (
32HVIPER-UPS) to allow VIPER system to continue
to operate without main power. Example code is supplied to handle the power
loss warning and battery backup control features.
- 24V power supply module with power cords for US, UK and European power
sockets.
- Eurotech Ltd Development Kit CD containing Windows CE 5.0 operating system
image, sample code, Technical Manual and datasheets.
- Quickstart manual.
• Embedded Linux development kit
Features of this kit are:
- 400MHz PXA255 processor with 64MB DRAM & 32MB Flash memory.
- Pre-configured build of Eurotech Ltd’s Embedded Linux, tailored specifically for
the VIPER, pre-loaded into the 32MB Flash.
- 2.6-based Linux kernel release, GNU C library.
- Compressed Journaling Flash File System (JFFS2) offering high reliability and
recovery from power interruptions.
- Rugged enclosure with optional
33HNEC Q-VGA TFT colour display and analogue
touchscreen.
- Uninterruptible power supply (
34HVIPER-UPS) to allow VIPER system to continue
to operate without main power.
- 24V power supply module with power cords for US, UK and European power
sockets.
- Optional - high performance IBM J9 VM.
- Quickstart tutorial guide.