Filter
Top Products
Quick Start — CrossPoint 300 Matrix Switchers, cont’d
CrossPoint 300 Matrix Switchers • Quick StartQS-2
RGBHV and Audio buttons select/deselect
video and/or audio. The Audio LED blinks to
indicate audio breakaway.
The Audio button and LED are present on
video-only switchers, but have no
function.
Audio also selects the audio level/adjust
mode. See “View, adjust the audio level” at
right.
Create a tie
1. Press and release
the Esc button to
clear any input
LEDs, output
LEDs, or control
LEDs that may be
lit.
2. Press and release the RGBHV and/or Audio
I/O button(s) to select or deselect video and/
or audio as desired.
3. Press and release the
desired input button.
4. Press and release the
desired output button(s).
5. Press and release the Enter button. All input
and output LEDs and the Enter LED go out.
RGBHV AUDIO
I/O
Lit when selected.
O
ff when deselected.
Off when deselecte
d.
Lit when selected.
5
The input LED
l
ights to indicate
the selection.
3 4 8
ENTE
R
O
utput LEDs blink to indicate a potential tie.
Enter LED blinks t
o
indicate the need t
o
confirm the change
.
PRESET
PRESET
PRESET
PRESET
1 2 3 4 5
Preset LED blinks.
Press and hold.
2 seconds
Save a
preset
Recall a
preset
Preset LED lights.
Press and release.
A
ll input and output buttons with assigned presets ligh
t.
T
he configuration data at assigned preset
l
ocations will be overwritten.
AUDIO AUDIO
Audio LED blinks.
Hold
2 seconds
4 5 6 7
7
OUTPUTS
Output LEDs display the
gain/attenuation.
— or —
Input LEDs display the
output volume level.
Press an input button t
o
adjust gain/attenuation
.
— or —
Press an output button
to adjust the output
VIEW ESC
T
his button
d
ecreases
t
he level.
This button
increases
the level.
1
ENTER
The LED blinks to indicate that this prese
t
is selected.
The Enter LED
blinks to indicate
the need to save o
r
recall the preset.
Save or recall a preset
1. Save a preset — Press and hold the Preset
button for 2 seconds.
Recall a preset — Press and release the Preset
button.
2. Press and
release the
desired
input or
output
button.
3. Press and release the Enter button.
View, adjust the audio level
1. Press and hold the
Audio button.
2. Press an input or
output button. See
chapter 3 to read the
displayed value.
3. Increase and decrease the
gain/attenuation or
volume level by pressing
the Esc (
) and
View (
) buttons.
4. Press and release the
Audio button to exit.
ESC
P
ress the Esc button to
c
lear all selections.
The LED
blinks once
.