Filter
Top Products
Matrix Software, cont’d
CrossPoint 300 Matrix Switchers • Matrix Software5-12
Using the software
1. To run the Button-Label Generator program, double-click on
the Button-Label Generator icon (shown at right) in the Extron
Electronics group or folder, and click OK when prompted. The
Button-Label Generator window appears (figure 5-13).
Figure 5-13 — Extron’s Button-Label Generator window
2. Under System selection, choose either the CP 300 128 Series / MVX 128 /
MTX 50 or CP 300 Series 1616 Series option (these selections match the label
strip size of these CrossPoint 300 switchers).
3. Using normal Windows controls, you can create and print labels that can be
placed in the label windows on the front panel of the switcher.
4. Press the Clear All Buttons button to create new labels as many times as
necessary to make all of the button labels that you need.
Access the Help program by clicking on the Help menu. Click on the Help menu
on the main screen, choose Show Help, and click the Load Demo button to see an
example of a completed Extron’s Button-Label Generator window.