Filter
Top Products
4-7Matrix 3200/6400 Series • Programmer’s Guide
INFORMATION COMMANDS ASCII (HOST-SWITCHER) RESPONSE (SWITCHER-HOST)
Request Information I/i I
X •T •U •M
X •Vmt •Amt •Sys •Dgn
Example I I64X64•T1•U2•M21X21•Vmt
Ø
•Amt1•Sys1•Dgn
ØØ
Example explanation: I64X64 indicates that this BME has 64 physical inputs and 64 physical outputs.
T1= Wideband Switcher, U2 indicates system has 2 BMEs and is set to M21X21 (21 Virtual Inputs and
21 Virtual Outputs). Vmt
Ø
= Video is not Muted, Amt1 = Audio is Muted. Sys1 indicates that this BME
has no redundant power supply and the main power supply is on. Dgn
ØØ
indicates no error (BME’s self-
test diagnostics passed. Dgn2
Ø
if reported = System physical size has changed since last virtualized.
Specific BME
I/i Same as Request Information Response above.
Notes:
1. Command “
Ø
I ” is equivalent to “I” or “i” command.
2.
1 = Wideband, 2 = Lo-Res, 3 = Sync, 4 = Audio (for this BME),
Ø
= BME not present.
3.
+ is physical size of this BME.
4.
, , , , are each two digit fields.
ADVANCED INSTRUCTION SET AND SIMPLE INSTRUCTION SET COMMANDS (PAGE 1 OF 3)
VIEW COMMANDS ASCII (HOST-SWITCHER) RESPONSE (SWITCHER-HOST)
Audio Gain V/v
GIn·Aud
Example V15G In15•Aud-
Ø
6
Example explanation: Virtual Input 15 Audio Level is set to -6 dB.
Global PRESET information
VI ,Grp
Example
Ø
VI Jims_Lecture,GrpA
Global PRESET Ties * *
ØØ
VA
SO
•
SO+1
•
SO+2
•
SO+15
•All
Views are 16 virtual outputs at a time; each position shows what virtual input is connected to that virtual output.
Preset
Ø
views the current configuration.
Example 1
Ø
*
Ø1
*
ØØ
VA
Example 1 explanation: Read Preset
Ø
(current) Ties of Virtual Inputs to Virtual Outputs
Ø
1 through 16 in Follow mode.
Example 2
Ø
*
17
*
ØØ
VA
Example 2 explanation: Read Preset
Ø
(current) Ties of Virtual Inputs to Virtual Outputs 17 through 32 in Follow mode.
Example 3
3
*
49
*
ØØ
VA
Example 3 explanation: Read Preset 3 Ties of Virtual Inputs to Virtual Outputs 49 through 64 in Follow mode.
Global PRESET w/Total Breakaway * * VC
SO
•
SO+1
•
SO+2
•
SO+15
•Plane
Command description preset*start-output*plane
Global PRESET by Specific BME * * VD
SO
•
SO+1
•
SO+2
•
SO+15
•Bme
Command description preset*start-output*BME#
Room PRESET information *
VI ,Grp
Room PRESET Ties * *
Ø
1*
ØØ
VA
Rvo
•
Rvo....
•All
Room PRESET w/Total Breakaway * *
Ø
1* VC
Rvo
•
Rvo....
•Plane
Command description room*preset*start-output*plane
Ø4•64•ØØ•ØØ•ØØ•ØØ•Ø3•Ø1•ØØ•ØØ•ØØ•64•ØØ•Ø1•ØØ•ØØ•All↵
virtual input #4 tied to virtual output #17
virtual input #64 tied to virtual output #18
no virtual input tied to virtual output #32
Ø4•--•ØØ•ØØ•ØØ•--•Ø3•Ø1•na•na•na•na•na•na•na•na•All↵
virtual input #4 tied to virtual output #49
virtual output #50 does not have audio follow (see note 3 below)
in a 64 virtual input x 56 virtual output configuration,
the last 8 virtual outputs are nonexistent (see note 2 below)
virtual input #4 tied to virtual output #1
virtual input #64 tied to virtual output #2
no virtual input tied to virtual output #16
Ø4•64•ØØ•ØØ•ØØ•ØØ•Ø3•Ø1•ØØ•ØØ•ØØ•64•ØØ•Ø1•ØØ•ØØ•All↵