Filter
Top Products
Programmer’s Guide, cont’d
Matrix 3200/6400 Series • Programmer’s Guide4-10
SWITCHER GENERATED UNSOLICITED RESPONSES
When a local event takes place, such as a Front Panel operation, the switcher responds by sending an
unsolicited response (message) to the Host. These switcher initiated messages are listed below.
RECONFIG
ØØ
= Audio level change
RECONFIG
Ø
2 = Room#1 or room#1’s preset name change
RECONFIG
Ø
3 = Room#2 or room#2’s preset name change
RECONFIG
Ø
4 = Room#3 or room#3’s preset name change
RECONFIG
Ø
5 = Room#4 or room#4’s preset name change
RECONFIG
Ø
6 = Room#5 or room#5’s preset name change
RECONFIG
Ø
7 = Room#6 or room#6’s preset name change
RECONFIG
Ø
8 = Room#7 or room#7’s preset name change
RECONFIG
Ø
9 = Room#8 or room#8’s preset name change
RECONFIG1
Ø
= Room#9 or room#9’s preset name change
RECONFIG11 = Room#1
Ø
or room#1
Ø
’s preset name change
RECONFIG12 = Name change for global preset #1-16
RECONFIG13 = Name change for global preset #17-32
RECONFIG14 = Current connection change
RECONFIG17 = Name change for virtual input #1-16
RECONFIG18 = Name change for virtual input #17-32
RECONFIG19 = Name change for virtual input #33-48
RECONFIG2
Ø
= Name change for virtual input #49-64
RECONFIG21 = Name change for virtual output #1-16
RECONFIG22 = Name change for virtual output #17-32
RECONFIG23 = Name change for virtual output #33-48
RECONFIG24 = Name change for virtual output #49-64
RECONFIG25 = Individual mute change
RECONFIG26 = RGB->SYNC delay change
RECONFIG34 = A global preset has been saved
RECONFIG35 = A room preset has been saved
RECONFIG36 = All RGB Sync Delays initialized (Zapped to
Ø
sec)
RECONFIG37 = All Audio Levels initialized (Zapped to
Ø
dB)
RECONFIG38 = All Mutes initialized (Zapped to UnMuted)
RECONFIG4
Ø
= Global mute change
RECONFIG4
1
= Power supply status changed
RECONFIG99 = Entire System initialized (Master Reset)