Filter
Top Products
Programmer’s Guide, cont’d
Matrix 3200/6400 Series • Programmer’s Guide4-8
ADVANCED INSTRUCTION SET AND SIMPLE INSTRUCTION SET COMMANDS
VIEW COMMANDS ASCII (HOST-SWITCHER) RESPONSE (SWITCHER-HOST)
Virtual Output MUTES VM
1
•
2
• • • • •
64
Mut
Notes:
1. Start output is always
Ø
1 for Room PRESET, because room has max. of 16 outputs assigned.
2. All “VI” values in responses are 2 numeric characters (i.e. 12 or
Ø
3) or “na” indicating non-existant virtual
outputs.
3. In “VA” View, any outputs that do not follow show as “- -“ in response.
4. SO = “Start-Output” parameter in “Global Preset commands”.
5. Rvo - Rvo.... = Set of Virtual Outputs assigned to specified “room” (up to 16 total).
RGB DELAY COMMANDS ASCII (HOST-SWITCHER) RESPONSE (SWITCHER-HOST)
Read RGB Delay (for 1 ch.)
D Out •Dly
Set RGB Delay (for 1 ch.) d * Out •Dly
Note: Where = delay in 1/2 second increments (i.e.
Ø
=
Ø
sec, 1
Ø
= 5.
Ø
sec)
DIRECT WRITE OF
GLOBAL PRESETS COMMANDS ASCII (HOST-SWITCHER) RESPONSE (SWITCHER-HOST)
Start Write Mode
P Write Preset Ready
End Write Mode p End Write Preset
Example P32 Write Preset 32 Ready
1*1!
1*2&
1*3%
:
:
1*64$
p End Write Preset 32
Notes:
1. Any non-output switching or invalid command between the Start and End commands will be ignored.
2. If there is no activity for 5 seconds while in write mode, then error E17 occurs.
3. No front panel switching (Actual Switching) is allowed during the Start and End commands.
4. If an End command
p command is issued with no Start command, then error E10 occurs.
Ø4•64•ØØ•ØØ•ØØ•ØØ•Ø3•Ø1•ØØ•ØØ•ØØ•64•ØØ•Ø1•ØØ•ØØ•Plane 1↵
Ø4•64•ØØ•ØØ•ØØ•ØØ•Ø3•Ø1•ØØ•ØØ•ØØ•64•ØØ•Ø1•ØØ•ØØ•Plane 1↵
Ø4•64•ØØ•ØØ•ØØ•ØØ•Ø3•Ø1•ØØ•ØØ•ØØ•64•ØØ•Ø1•ØØ•ØØ•Plane 4↵
Ø4•64•ØØ•ØØ•ØØ•ØØ•Ø3•Ø1•ØØ•ØØ•ØØ•64•ØØ•Ø1•ØØ•ØØ•Plane 4↵
virtual input #4 tied to virtual output #17
virtual input #64 tied to virtual output #18
no virtual input tied to virtual output #32
virtual audio plane
Command Response Description
1
VI Jims_Lecture,GrpB Read Preset 1 breakaway information (follow versus breakaway mode)
In the 4 examples below, all Ties are read from a 32 x 32 virtual RGBA (red, green, Blue, Audio) system
with Audio/Video breakaway (Grp B). In Examples 1 and 2 below (Video breakaway), only virtual plane 1
(Red) needs to be read, since virtual planes 2 and 3 (Green and Blue) are the same as virtual plane 1.
Examples 3 and 4 below refer to virtual Audio breakaway with virtual plane 4 representing Audio.
Example 1
1*Ø1*Ø1VC
Explanation: Read Preset 1 Red (plane 1) Ties of Virtual Video Inputs to Virtual Video Outputs Ø1 through 16.
Example 2
1
*
17
*
Ø1
VC
Explanation: Read Preset
1
Red (plane 1) Ties of Virtual Video Inputs to Virtual Video Outputs 17 through 32.
Example 3
1
*
Ø1
*
Ø4
VC
Explanation: Read Preset 1 Audio (plane 4) Ties of Virtual Audio Inputs to Virtual Audio Outputs
Ø
1 through 16.
Example 4
1
*
17
*
Ø4
VC
Explanation: Read Preset 1 Audio (plane 4) Ties of Virtual Audio Inputs to Virtual Audio Outputs 17 through 32.