Filter
Top Products
Extron • System 4
xi
Switcher Series • User’s Manual
Chapter 3 • Using the System 4
xi
Front Panel
3-11
Horizontal Shift Control
This is for line doubled/line quadrupled signals only.
Press H SHIFT to bring up this menu. The current Horizontal Shift setting will be
displayed. Use or to change the setting, while observing the projector/
monitor screen. (Range: -62 to +62).
Press
to save the new setting.
Press H SHIFT again to exit and return to the default screen.
To exit without saving, press H S
HIFT again (without pressing ), or use one
of the other procedures above.
Contrast Control
Press CONT to display this menu. The current Contrast setting will be displayed.
Use or to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press
to save the new setting.
Press CONT again to exit and go to the default screen.
Color Control
Press COLOR to display this menu. The current Color level will be displayed.
Use or to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press to save the new setting.
Press COLOR again to exit and go to the default screen.
Tint Control
Press TINT to display this menu. The current Tint (Hue) level will be displayed.
Use or to change the setting, while observing the projector/monitor screen.
(Range: -62 to +62).
Press to save the new setting.
Press TINT again to exit and go to the default screen.
Detail Control
This control is only on the System 4LDxi and 4LQxi
Press DETAIL to display this menu. The current Detail (Sharpness) setting will be
displayed. Use or to change the setting, while observing the projector/
monitor screen. (Range: 1 to 4).
Press to save the new setting.
Press DETAIL again to exit and go to the default screen.