Filter
Top Products
IPL M PDP-ES • Communication and Control
IPL M PDP-ES • Communication and Control
Communication and Control
command contains invalid parameters, it returns an error
response to the host.
E12 — Invalid port number
E13 — Invalid parameter
E14 — Not valid for this configuration
E17 — System timed out
E22 — Busy
E24 — Privilege violation
E25 — Device not present
E26 — Maximum number of connections exceeded
E27 — Invalid Event number
E28 — Bad Filename/File not found
References to errors (at command descriptions on the
following pages)
14
= Commands that give E14 (Invalid Command for this
configuration) if sent to Extron product whose current
configuration does not support the command.
24
= Commands that give E24 (Privilege violation) if not
administrator level
27
= Commands that may give E27 (Invalid Event number)
28
= Commands that may give E28 (File not found)
4-22
Command/Response Table for Simple Instruction Set (SIS) commands
Command ASCII (Telnet) URL Encoded (Web) Response
Bidirectional Serial Data port
Send data string Esc 1*300*100*3D RS
X2
W1%2A300%2A100%2A3DRS|
X2
response from command
Configure parameters
24
Esc 1*
X25
,N,8,1CP W1%2A
X25
%2CN%2C8%2C1CP| Cpn1•Ccp
X25
,N,8,1
View parameters Esc 1CP W1CP|
X25
,N,8,1
Set receive timeout
24
Esc 1*400*200*0*3DCE W1%2A400%2A 200%2A0%2A3DCE| Cpn1•Cce400,200,0,3D
View receive timeout Esc 1CE W1CE| 00400, 00200, 0, 00003D
Set redirect mode
24
Esc 2*1*500*3DCD W2%2A1%2A500%2A3DCP| Cpn 2•Ccd 1, 00500,00003D
Terminated redirect mode
24
Esc 1*0CD W1%2A0CD| Cpn 1• Ccd 00000,00000,00000L
View redirect mode Esc 1CD W1CD| 00002,00500,00003D
Firmware Version/Part Number/Information
Query firmware version Q Q
X11
Query verbose version information 0Q 0Q sum of responses from 2Q-3Q-4Q
Query firmware version 1Q 1Q
X11
Query bootstrap version 2Q 2Q
X11
Query factory firmware version 3Q 3Q
X11
(plus web ver.-desc-UL date/time)
Query updated firmware version 4Q 4Q
X11
(plus web ver.-desc-UL date/time)
(Note: An asterisk (*) placed after the version number indicates which version is currently running. Question marks (?.??) indicate
that only the factory firmware version is loaded. A caret (^) after the version number indicates the firmware version that should be
running, but a Mode 1 reset was executed The default factory firmware version is loaded. An exclamation point (!) after the version
number indicates corrupted firmware.)
Request part number N N 60-725-01
Request model name 1I 1I IPL M PDP-ES
Request model description 2I 2I Pioneer PDP Expansion Solution Interface
Card
Request system memory usage 3I 3I # Bytes used out of 1024 Kbytes
Request user memory usage 4I 4I # Bytes used out of 704 Kbytes
4-23