Filter
Top Products
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
The Class A limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio commu-
nications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the
unit to ensure compliance with FCC emissions limits.
Copyright
© 2010 Extron Electronics. All rights reserved.
Trademarks
All trademarks mentioned in this manual are the properties of their respective owners.
Example of FCC Class A Notice in Manuals
Notes, Tips, Cautions, and Warnings
NOTE: Notes call attention to information that may be of special importance.
TIP: Tips provide technical information that may be helpful during
installation, for performing a procedure or adjustment, or in the
operation of the USB Extenders.
CAUTION: Indicates a potential hazard to equipment or data may exist.
WARNING: Indicates a potential hazard to personal safety exists.