Filter
Top Products
DISPLAY SET SETTINGS
☞
Method of control
To play back a digital video recorder (sold separately) from
this unit
1. Make the following setting on the digital video
recorder’s VIDEO INPUT SET menu.
•
Set MULTIPLEXER to SANYO.
•
Set VIDEO INPUT to DIGITAL.
Note: Refer to the Instruction Manual for the digital video
recorder for details on the VIDEO INPUT setting.
2. Press the VCR button on this unit and press the
cursor (c) button.
The digital video recorder playback image will appear on the
monitor.
3. Press the cursor, NEXT and setting buttons to
enable operations such as the following.
While it is operating, the digital video recorder indicator will
illuminate or flash.
(Cursor buttons)
1 j: Still image
2 c: Playback
3 d: Reverse play
4l: Stop
5 (NEXT button)
If you press this button when several digital video recorders
are connected, you will be switched in sequence from the
digital video recorder nearest to this unit.
(Setting buttons)
6 +: Increase playback speed
7 –: Decrease playback speed
Note: These operations are not available with SSP control
(RS-485).
(VIDEO INPUT SET)
MULTIPLEXER : SANYO
VIDEO INPUT : DIGITAL
2
1
35
367
COLOR LEVEL settings
To adjust the monitor screen color level.
Use the cursor buttons to select
COLOR LEVEL “AUTO” and then
press the setting buttons to adjust
the color level.
Display examples:
• AUTO: Adjusts the color level automatically.
• 1 to 10: Adjusts the color level manually. The larger the
number, the more intense is the monitor color.
Note: If 10 is selected, color will be applied forcibly. If a color
signal is extremely attenuated by the effect of a cable, for
example, color can be forcibly applied.
DISPLAY SET-12
+–
1
(DISPLAY SET)
TITLE DOWN ¤
MULTI SCREEN NORMAL
SEQUENCE 1 S
MASK OFF
MAIN†SPOT1 OFF
DIGITAL CONNECTION OFF
COLOR LEVEL AUTO
DISPLAY SET-12
English
– 51 –