VCR SET SETTINGS
PROGRAM REC. setting
Example 1: To record images from cameras
1, 2 and 3 in MODE 1
Press the MENU button.
The MAIN MENU screen will be displayed.
Use the cursor button to select
“VCR SET” and then press the
NEXT button.
The VCR SET screen will be displayed.
Use the cursor button to select
PROGRAM REC. “OFF”, press the
setting buttons to change the
setting to “MODE1”, and then press
the NEXT button.
The PROGRAM REC. SET screen will be
displayed.
Refer to the display example to select
program recording.
MENU
1
(MAIN MENU)
1 LANGUAGE *
2 CLOCK SET *
3 DISPLAY SET *
4 VCR SET *
5 ALARM SET *
6 SECURITY SET *
7 CONTROL SET *
8 ALARM DATA *
(*:NEXT)
NEXT
2
(VCR SET)
RECORDER TLS
REC.SPEED 2 H
ALARM REC.SPEED 2 H
SW.IN EDGE ñ
REC.PICTURE 01
PROGRAM REC. OFF
NEXT
3
(VCR SET)
RECORDER TLS
REC.SPEED 2 H
ALARM REC.SPEED 2 H
SW.IN EDGE ñ
REC.PICTURE 01
PROGRAM REC. MODE1 *
(*:NEXT)
Display examples:
• OFF: PROGRAM REC. cannot be carried out. Images from
all connected cameras are recorded in the same way.
• ONLY: Only images from the cameras which have output set
to ON are recorded.
•
Recording pattern when camera 1, 2 and 3 are ON
• MODE1: Recording alternates between images from the
cameras which have output set to ON and images from all
cameras that are connected. If image output from multiple
cameras has been set to ON, images from the cameras that
are set to ON and images from all cameras are alternately
recorded one image at a time.
•
Recording pattern when camera 1, 2 and 3 are ON
• MODE2: Recording alternates between images from the
cameras which have output set to ON and images from all
cameras that are connected. If image output from multiple
cameras has been set to ON, all images from the cameras
that are set to ON are recorded first, and then images from all
cameras are recorded one image at a time.
•
Recording pattern when camera 1, 2 and 3 are ON
VCR SET-4
Only images from
cameras selected
(ON) are recorded.
Images from cameras selected (ON) and images
from all cameras are recorded alternately.