Filter
Top Products
DSP-100/2000
Users Manual
1-2
• Produces 2-way Autotest results in approximately 20 seconds.
• Includes a stored library of common test standards and cable types.
• Allows for configuration of up to 4 custom test standards.
• Time Domain Crosstalk (TDX
)
analyzer locates the position of crosstalk
(NEXT) problems on a cable.
• Tests for return loss (RL).
• Produces plots of NEXT, attenuation, ACR, and RL. Shows NEXT, ACR, and
attenuation results up to 155 MHz.
• Stores at least 500 cable test results in nonvolatile memory.
• Monitors impulse noise and network traffic on Ethernet systems. Hub port
locator helps you identify port connections.
• Sends stored test reports to a host computer or directly to a serial printer.
• Flash EPROM accepts test standard and software upgrades.
• Tests fiber optic cable when used with a Fluke DSP Fiber Optic Meter.
Model DSP-2000 includes the following additional features:
• Monitors 100BaseTX network traffic.
• Diagnostic routine provides specific information about the location and cause
of an Autotest failure.
• Tests for remote return loss (RL@REMOTE) and power sum NEXT
(PSNEXT).
• Determines which standards are supported by a hub port connection.
• Tone generator lets you use an inductive pickup device to identify cables in a
LAN installation.