Filter
Top Products
Installing and Maintaining the E1200i System 91
This appendix contains two major sections:
• E1200i AC Chassis Physical Design
• E1200i DC Chassis Physical Design
• Environmental Specifications
• Agency Compliance
E1200i AC Chassis Physical Design
E1200i AC System Power Requirements
Appendix D System Specifications
Parameter Specifications
Height 42 inches (106.68 cm)
Width 17.40 inches (44.20 cm)
Depth (without cable management system) 22.25 inches (56.51 cm)
Chassis weight with factory-installed components
(backplane and air filter)
139 pounds (approx.) (63.05kg)
Weight fully loaded (backplane, air filter, 2 fan trays, 10
SFMs, RPMs, and 14 line cards)
394 pounds (approx.) (178.7 kg)
Mounting Attached rack mount brackets are factory set for front
mounting in a standard 19-inch rack.
Mounting brackets are adjustable for center and rear
mounting.
Optional brackets are available for front or center
mounting in a 23-inch rack or cabinet.
Rack clearance required Front: 18 inches
Rear: 20 inches
Thermal Output
Maximum for fully loaded chassis 7,784W (26,578BTU/HR)
Minimum for chassis with one 48-port 1GE line card 1,450W (4,951 BTU/HR)
Parameter Specifications
Maximum Power Consumption 7,784W
Input Voltage Range 200-240 VAC 50/60 Hz