Filter
Top Products
Installing and Maintaining the E1200i System 93
E1200i DC Chassis Physical Design
E1200i DC System Power Requirements
Parameter Specifications
Height 36.75 inches (93.35 cm)
Width 17.40 inches (44.20 cm)
Depth (without cable management system) 21.25 inches (53.98 cm)
Chassis weight with factory-installed components
(backplane and air filter)
97 pounds (approx.) (44.00 kg)
Weight fully loaded (backplane, air filter, 2 fan trays, 10
SFMs, RPMs, and 14 line cards)
319 pounds (approx.) (144.70 kg)
Mounting Attached rack mount brackets are factory set for front
mounting in a standard 19-inch rack.
Mounting brackets are adjustable for center and rear
mounting.
Optional brackets are available for front or center
mounting in a 23-inch rack or cabinet.
Rack clearance required Front: 18 inches
Rear: 20 inches
Thermal Output
Maximum for fully loaded chassis 6850W (23,389 BTU/HR)
Minimum for chassis with one 48-port 1GE line card 1,450W (4,951 BTU/HR)
Parameter Specifications
Maximum Power Consumption 6,850W
Input Voltage Range 200-240 VAC 50/60 Hz
Maximum Heat Dissipation 6,325W (21,598 BTU/HR)
Maximum Power Supply Input Current 16A per module