Filter
Top Products
3-16 User’s Manual
Menu Items
*8 Displayed when an FPS card is installed
*9 If the total capacity of memory is 7M bytes or less with banding
mode off, the resolution is automatically set to 300 dpi. When
printing on Legal size paper at 600 dpi, select “banding mode
on” or install additional memory cards of 10M bytes or more.
*10 This is essential for sharing the printer among multiple
computers.
*11 This is for the parallel interface.
*12 Displayed when a serial interface board is installed
*13 Displayed when a network interface board is installed
*14 Consists of four parameters. The one followed by < can be
changed.
The following briefly explains each item of the menu mode.
Page format menu
Copies The number of copies the printer prints from
each page
Paper/Envelope A paper size or envelope size to be used by the
printer
Orientation A printing direction
Form lines The number of lines printed per page
Page protect Whether a block of printer memory is reserved
exclusively for text and graphics data,
especially for printing dense text or complex
graphics, to prevent memory overflow errors.
However, it reduces the amount of printer
memory available for downloadable fonts.
Quality menu
Smoothing Whether the edge smoothness technology is
applied (improves resolution to 1200 dpi class)
Resolution The number of dots printed per inch
Economy mode Toner saving mode
Thick paper Mode for printing thick paper. Be sure to turn
this off whenever you are using paper of
ordinary thickness.
Menu Items