Filter
Top Products
Starting the Pen Tablet
2-3
Starting the Pen Tablet 2
Follow the procedure below to start the Stylistic 2300 pen tablet. Before you begin,
confirm that the system is in the Off state. To do so, observe the Status display. If the
Power icon is not visible in the Status display, the system is in the Off state and it is
safe to perform this procedure. If the Power icon is visible (either blinking or on
continuously), do not perform this procedure. See “System States” earlier in this
chapter for details on operational modes represented by the Power icon.
1. Press the Suspend/Resume button to start the system.
2. Ensure that the battery pack in your pen tablet is sufficiently charged, or connect
an external power source such as the AC adapter or auto adapter to your pen
tablet. See “Status Display” in Chapter 1 to determine the percentage of charge
represented by the Battery Gauge icon in the Status display.
After performing system initialization, the system starts the operating system
installed on the hard disk drive. Once the operating system is running, you can use
the system.
Caution
The Suspend/Resume button can be configured to either
suspend and resume the system or to turn the system on and
off. Under most circumstances, the Suspend/Resume button
will be used to suspend and resume the system. If it is set up
as an On/Off button, be sure to save your data before you
press it -- turning off the system this way will result in the loss
of active data.