Fujitsu 2300 Graphics Tablet User Manual


 
2-14
Using the Stylistic 2300 Pen Tablet
PC Card Slots 2
The Stylistic 2300 pen tablet has two PC Card slots that allow you to install up to two
Type II PC Cards using both slots 1 and 2, or a single Type III PC Card using slot 1
only.
There are two ways to install a PC card, depending upon the card configuration.
If you need access to the top of the card after it is installed (as with some LAN
cards), install the card through the PC card door shutters.
If access to the card is not required after it is installed (as with flash memory),
open the PC card door before installing the card.
If you need assistance installing a PC Card in the Stylistic 2300 pen tablet, contact
your local help desk or your reseller.
Figure 2-4 PC Card Slots
PC Card
Door
Slot 1 Slot 2
Eject
Buttons