Fujitsu 2300 Graphics Tablet User Manual


 
Modem Connection
2-13
Shut down the system if you won’t be using the system for an extended period of
time.
Use power management timeouts (accessible through the BIOS setup) to help you
conserve power automatically.
Care of Bridge Battery
When installed in the pen tablet, the battery pack provides power to some system
components—even when the system is in the Off state. When the battery pack is
removed, power is supplied to these components by a “bridge” battery that is built
into the pen tablet.
The bridge battery is not designed for long-term operation. To maintain the bridge
battery properly, observe the following measures:
To prevent draining the bridge battery, always store the pen tablet with a charged
battery pack installed.
If the bridge battery becomes drained, it takes approximately 11 hours for it to be
recharged.
The bridge battery charges when the AC Adapter is connected and the system is
in On or Off states or Suspend mode; it charges from the battery only when the
system is in On state.
Modem Connection 2
Note: The internal 56 Kbps modem installed in the Stylistic 2300 pen tablet* has actual
transfer rates of 53 Kbps (receive), 33.6 Kbps (send), and 14.4 Kbps (fax).
Download rates are limited to 53 Kbps in the United States due to FCC
restrictions.
* The internal modem is available as an option in North America only.
The Stylistic 2300 pen tablet is designed to accept a standard RJ-11 telephone plug.
Connect the plug to the modem jack located on the top of the pen tablet, to the left of
the PC Card door. The telephone plug can be installed whether or not the pen tablet
has power applied.
If you need assistance configuring the Stylistic 2300 pen tablet modem, contact your
local help desk or your reseller.