Filter
Top Products
2-4
Using the Stylistic 2300 Pen Tablet
Shutting Down the System 2
Follow these steps to shut down and turn off your system:
1. If system operation has been suspended, resume system operation. See
“Resuming System Operation” later in this chapter for details.
2. Save your work and close all running programs.
3. Choose Shut Down from the Windows (95, 98, or NT) Start menu and carry out
the Shut Down command.
The system is now in the Off state.
Suspending System Operation 2
The Stylistic 2300 pen tablet allows you to suspend the system operation without
closing programs or exiting the operating system. Use this feature to conserve battery
power when a system shutdown is inconvenient or when the battery needs to be
changed.
To suspend system operation:
1. Press the Suspend/Resume button, or carry out the Suspend command from your
operating system or power management program. (If your system is configured
to suspend operation using Suspend-to-Disk mode, which is explained later in
this procedure, a message is displayed while data is saved to your hard disk.)
Caution
The Suspend/Resume button can be programmed to act as an On/Off switch.
When it is configured as an On/Off switch, pressing the Suspend/Resume
button causes all active data to be lost. If the system is not shut down properly
before pressing the On/Off-configured button, a disk checking program may
automatically run the next time you turn on the system. If it encounters any
disk problems, you may be required to connect a keyboard in order to re-start
the system.
Caution
If you are replacing the battery pack,
wait until system operation is
suspended and the power icon is flashing
before you remove the battery
pack. Failure to do so could result in loss of your unsaved data.