Fujitsu 3400 Graphics Tablet User Manual


 
32
Care and Maintenance
3. Remove the protective coating from the adhesive side of the screen protector first.
4. Apply the screen protector to the display screen surface. When doing so, orient
the screen protector with the adhesive side of the screen protector facing the
display screen and the notched corner of the screen protector toward the lower
left corner of the display screen.
5. Apply pressure to the screen protector with your finger using a continuous
wiping motion along the edges. The adhesive sets completely within 48 hours.
To ensure a good seal between the screen protector and the display, do not lift the
screen protector from the display once it has been applied.
6. Remove the protective plastic cover from the face of the screen protector.
7. Clean any residue left behind by the protective coating from the exposed surface
of the screen protector by wiping gently with a soft cotton cloth dampened with
isopropyl alcohol. Wipe the screen protector with a soft dry cloth to remove any
low-tack adhesive; this will help prevent the pen tip from squeaking.
The screen protector is now installed.
Storing the Stylistic 3400 Pen Tablet 3
Store the Stylistic 3400 pen tablet in the Off state with a fully charged battery pack
installed. The Stylistic 3400 battery pack always provides power to some system
components, even when the system is in the Off state. If the system is stored with the
battery pack removed, these components are powered by the systems internal
bridge battery. The bridge battery is not designed for extended use and will
discharge in a short period of time; this could result in damage to the batteries. You
can store the pen tablet in the Off state for about 30 days with a fully charged battery
Caution
The Stylistic 3400 pen tablet is
not waterproof
. Do not pour
liquids on the system or wash it with a heavily soaked cloth.
Caution
Be sure not to store your Stylistic 3400 with the screen side
down, otherwise damage to the display may occur.