Filter
Top Products
24
5 Fill out [Computer name], [Administrator password], and [Reenter password], and click
[Next].
[Setting up network] appears.
To set up the network, ask your network administrator to check the setup after completing
the setup, and set it up for your operating environment.
6 Click [Standard setting] and [Next].
Point
With [Standard setting], the following network components are installed.
● Microsoft Network Client
● Microsoft Network File and Printer Share
● Internet Protocol (TCP/IP)
[Work group or domain name] appears.
7 Click [This computer is not on the network, or it is connected to the network without
domain], and click [Next].
[Windows 2000 has been successfully installed] appears.
8 Click [Restart], or wait 15 seconds to restart the computer.
[Starting the Network Identification Wizard] appears.
Important
Do not click [Back] on this screen.
To correct the setting, complete the setup, and then correct the setting.
9 Click [Next].
[Computer user] appears.
10 Click [User for this computer...] and [Next].
CHAPTER 2 Bennett (19-32) 6/8/02, 10:22 AM24