Filter
Top Products
26
■ Problem During Setup?
If the computer freezes during setup, or if you have any other problem, see the following items.
❒ The screen does not show anything when the computer is turned on.
● Turn of the computer, and check the connection of display.
❒ I cannot go on with the Windows setup.
● See “Turn off the computer”, turn off the computer, and repeat the setup procedure.
● If you press a key before a dialog box is completely displayed during the Windows setup,
the Windows setup may not be completed successfully. Wait until the dialog box is fully
displayed, and then use the mouse to perform the procedure.
❒ The screen displayed is not centered, or the screen is not clear, after the computer is turned
on.
● If your display has a setting function, see the manual of display.
❒ The computer makes noise when starting up.
● Noise is generated during the Windows setup.Adjust the volume, if the speaker is
connected.
❒ The [Add New Hardware Wizard] dialog box appears.
● Install the driver suitable to your monitor.
CHAPTER 2 Bennett (19-28) 12/6/02, 10:15 AM26