Filter
Top Products
38
■ Maintenance of the PC Unit
CAUTION
● Before starting maintenance work, turn off the PC and all devices
connected to it, and unplug them.
Otherwise, electric shock may occur.
● Clean the PC using a soft dry cloth. Wipe remaining dirt off using a damp cloth, moistened
with neutral detergent and wrung well. Once the dirt is wiped off, remove the neutral detergent
from the PC with a well-wrung cloth moistened with water. Be careful not to let water enter the
PC system.
● Clean the ventholes regularly to prevent dust buildup.
● Do not use solvents. Use neutral detergent only. Otherwise, the PC may be damaged.
■ Maintenance of the Mouse
Clean the surface using a soft dry cloth. If the mouse ball does not roll freely, remove and clean
the ball.
Take the following steps.
1 Remove the mouse bottom cover.
Remove the cover on the bottom of the mouse by turning it in the direction of the arrow.
2 Remove the ball and clean it with water.
Turn over the mouse to remove the ball. Clean the ball with water.
5 Maintenance of the Hardware
Ball
CHAPTER 3 Bennett (29-40) 6/13/02, 2:38 PM38