Filter
Top Products
43
● After removing the feet, place the PC unit on a soft cloth.
Placing the PC directly on a hard surface may cause scratches on the PC.
● Be careful with the cables and components inside.
Do not damage or modify them.
● Be careful of static electricity.
PC boards and electronic parts of internal peripheral devices are exposed. They may be
damaged by static electricity generated on your body. Before handling these parts, touch a
large metallic object to discharge static electricity.
● Do not touch PC board surface, soldered parts or connectors.
Hold PC boards by the brackets or edges.
● Power supply for peripheral devices
Typical peripheral devices should be turned on before turning on the PC, however, some
should be turned on after the PC. See the manual for the peripheral device.
● Use ACPI peripheral devices only.
This PC conforms to the ACPI standard (one of the power supply control standards for power
saving). When you use a peripheral device on an ACPI-conforming OS, ask the device
manufacturer if your device conforms to ACPI. Non-conforming devices may not work properly.
● Use an appropriate screwdriver.
You must use a Phillips screwdriver to install/remove peripheral devices.
Use a screwdriver of an appropriate size not to damage screw heads.
CHAPTER 4 Bennett (41-52) 12/6/02, 10:19 AM43