Fujitsu 5000 Personal Computer User Manual


 
47
Installing Memory Modules
1 Unplug the PC.
2 Remove the upper cover.
3 Remove the expansion card mounting bracket and reinforcing fitting.
Remove the two screws and pull straight up the expansion card mounting bracket. (The
reinforcing fitting is removed together with the expansion card mounting bracket.)
When an expansion card has been installed, remove the cable from the card and remove the
bracket.
4 Pull the hooks on both sides of the slot outward.
5 Insert a memory module into the slot.
Insert the memory module into the slot while aligning the notch on the memory module with
that on the slot.
When the memory module is inserted correctly, the hooks on both side rise.Make sure that
the hooks hold the memory module securely.
CHAPTER 4 Bennett (41-52) 12/6/02, 10:19 AM47