Filter
Top Products
System upgrades
46 A26361-K990-Z120-1-7619, Edition 6
Installing ventilation duct (CELSIUS M)
► Pull the fan cable off the fan before the ventilation duct is installed in the device.
► Connect the fan cable to the corresponding plug contact on the mainboard (refer also to the
manual of the mainboard).
i
When routing the fan cable, make sure that it is not kinked or pinched.
When fitting the ventilation duct, be careful not to damage the processor cooler(s) on the
mainboard.
a
2
2
2
2
3
1
► Place the ventilation duct and the fan in the casing at a slight angle in the direction of the
arrow (1). When doing so, the hooks of the ventilation duct must hook into the openings (2) in
the back of the casing.
► Push bothersome cables aside if necessary.
► Press the ventilation duct and the fan into the casing in the direction of the arrow (3) until the
ventilation duct engages noticeably.
The fan is properly engaged when the locking lug (a) protrudes slightly at the back of the casing.
► Connect the fan cable to the fan.