Filter
Top Products
System upgrades
68 A26361-K990-Z120-1-7619, Edition 6
Installing/removing a SmartCard reader (optional)
You can also install a SmartCard reader in the bay of the floppy disk drive in place of the drive.
i
You can install either a WLAN module or a SmartCard reader in your device.
SmartCard reader, installing
Screwing SmartCard reader onto carrier
a
a
1
2
2
► Push the SmartCard reader - with the
component side facing downwards - in the
direction of the arrow (1) into the guide (a).
► Fasten the SmartCard reader with the
screws (2).
SmartCard reader, installing
► Open the casing (see "Opening the casing").
► If necessary, open the front panel (see "
Opening front panel").
► Remove the floppy disk drive (see "
Removing the floppy disk drive").
2
2
1
► Slide the SmartCard reader into the slide-in module (1).
► Fasten the SmartCard reader with the screws (2) on both sides of the slide-in module.