Filter
Top Products
System upgrades
A26361-K990-Z120-1-7619, Edition 6 55
1
3
2
2
► Push the board up to its slot (1).
► Press the board into the slot so that it engages.
► If necessary, connect the cables.
► Fold the locking rail (3) closed by pressing the clips (2) through the notches on the casing rear
panel from the outside until they engage.
► If you have removed the cross-piece, install it now (see "
Installing the cross-piece").
► Install the fan (see "
Installing the side fan").
► Close the casing (see "
Closing the casing").
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings in
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The slots 1, 3, 5 and 7 are suitable for low-profile cards with an adapter. The slots are
counted from the bottom to the top.