Filter
Top Products
6-16 SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
6.2.3 Installing the CD-RW/DVD-RW Drive Unit
Caution – Do not force the CD-RW/DVD-RW Drive Unit into the slot. Doing so can
cause damage to the component and server.
● Place the CD-RW/DVD-RW Drive Unit into the drive slot and gently push it in
until it locks in place.
6.2.4 Securing the Server
1. Power on the server.
This step includes reconnecting power cables, and turning the keyswitch to the
Locked position. See “Powering the Server On Using Software” on page 4-13.
Note – If the Solaris automatic booting is set, use the sendbreak -d domain_id
command after the display console banner is displayed but before the system starts
booting the operating system to get the ok prompt.
2. Confirm the hardware.
This step includes running programs to be certain all components are mounted
again and then booting the operating system.
Refer to “Verifying Hardware Operation” on page 4-9 for more information.