Filter
Top Products
12-12 SPARC Enterprise M4000/M5000 Servers Service Manual • August 2009
7. Collect an XSCF snapshot to archive system status prior to upgrade.
If a problem should occur during the upgrade procedure, a snapshot of the
system status might be helpful.
8. Update the XCP version.
For instructions for updating the firmware, refer to the Sun SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide.
9. Log in to the XSCF again, using an account with platadm or fieldeng
privileges.
10. Power on all the domains, and apply OpenBoot PROM firmware.
The ok prompt is displayed. You do not need to start the Solaris OS.
11. Check the updated OpenBoot PROM version.
The following example shows output for XCP 1081, in which the version of
OpenBoot PROM is 02.08.0000:
12. Turn off the power to all the domains.
XSCF> snapshot -t user@host:directory
XSCF> poweron -a
XSCF> version -c cmu -v
XSCF> version -c cmu -v
DomainID 0: 02.08.0000
DomainID 1: 02.08.0000
DomainID 2: 02.08.0000
DomainID 3: 02.08.0000
XSB#00-0: 02.08.0000(Current) 02.03.0000(Reserve)
XSB#00-1: 02.08.0000(Current) 02.03.0000(Reserve)
XSB#00-2: 02.08.0000(Current) 02.03.0000(Reserve)
XSB#00-3: 02.08.0000(Current) 02.03.0000(Reserve)
XSB#01-0: 02.08.0000(Current) 02.03.0000(Reserve)
XSB#01-1: 02.08.0000(Current) 02.03.0000(Reserve)
XSB#01-2: 02.08.0000(Current) 02.03.0000(Reserve)
XSB#01-3: 02.08.0000(Current) 02.03.0000(Reserve)
...
XSCF> poweroff -a