Fujitsu MAP3147 Computer Drive User Manual


 
5.2 INIT Error Recovery Methods (Recommended)
C141-E167 5 - 15
Table 5.3 Sense data error classification (2 of 4)
K* C* Q* Outline of Error L*
Recovery Method
(See Table 4.4.)
3 11 xx Unrecovered read error Need 12
13 00 S
y
nc b
y
te not found for data field
14 01 No record found
These errors were detected during accessing of the
disk media, but they were errors which could not
be recovered from through the IDD's retry
processing.
Positionin
g
error Need 12315xx
This is an error of the disk drive’s seek system
3 19 xx SA information error Need 7
1C xx SA information error not found
The information recorded in (SA) on the disk
media cannot be read correctly.
31 00 Medium form at corru
p
ted Need 18
FORMAT command failed
3
31 01
The data format on the disk media is not correct.
403xxPeri
p
heral device write fault Need 7
32 01 Defect list update failure
These are errors detected in the operation of the
disk drive.
4 15 xx Positionin
g
error Need 12
This is an error of the disk drive's seek system.
4 32 00 No defect s
p
are location available None 19
No usable alternate blocks exist on the disk drive.
4 40 nn Diagnostic failure on component 'nn' Need 13
An error was detected in the IDD's self-diagnosis.
4 44 nn Internal tar
g
et failure Need 20
An internal hardware error or a microcode
detection error was detected in the IDD.
4 4C xx Calibration failed Need 10
C4 xx Drive failure
The initial seek was terminated abnormally. Or, a
serious error was detected in the drive's control
system.
* K: Sense Key C: Sense Code
Q: Sub-sense code L: Logging Necessary? (shown in Section 5.2.3)