Filter
Top Products
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
28
2.5 Monitoring Multiple Target Devices
ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN
2.5.2.1 ETERNUSmgr for Solaris OS and Linux
When adding extra machines, it is easiest to just copy and edit an existing setup file.
P
rocedure
1 Confirm the contents of the installation directory.
Make sure that the necessary files and directories (stxchk, _STXPOLL.INI, STXPOLL_1.INI, stx-
poll, stxpolld, www/) have all been installed.
# ls /opt/FJSVgrmgr/
stxchk _STXPOLL.INI STXPOLL_1.INI stxpoll stxpolld www/
2 Copy an existing setup file.
File name starts with "STX" and ends with ".INI".
# cp /opt/FJSVgrmgr/STXPOLL_1.INI /opt/FJSVgrmgr/STXPOLL_2.INI
3 Confirm the copy results.
# ls /opt/FJSVgrmgr/
stxchk _STXPOLL.INI STXPOLL_1.INI STXPOLL_2.INI stxpoll stxpolld
www/
4 Edit the copied file. (The STXPOLL_2.INI file is used here.)
Vi editor is used here.
Refer to "2.3 Setting Items" (page 12)
for details of how and which parameters should be changed
in the new setup file.
# vi /opt/FJSVgrmgr/STXPOLL_2.INI
Caution:
"_STXPOLL.INI" is provided as a model file. If you copy this file to make a new setup file, be
sure to keep the original file as is.
2.5.2.2 ETERNUSmgr for Windows®
When adding extra machines, it is easiest to just copy and edit an existing setup file.
P
rocedure
1 Confirm the contents of the installation directory using Explorer, etc.
Make sure the following files and folder have been installed in the installation directory: _stxpoll.ini,
STXPOLL.exe, STXPOLL_1.INI, stxpolld.exe, stxsmail.exe, and \www (\www is a folder).
2 Copy an existing setup file.
Example: STXPOLL_1.INI
3 Change the name of the copied file.
Setup file names must start with "STX" and end with ".INI".
Example: STXPOLL_2.INI
4 Edit the copied file. (The STXPOLL_2.INI file is used here.)
Use a text editor such as Note Pad to edit the copied files.
Refer to "2.3 Setting Items" (page 12)
for details of how and which parameters should be changed
in the new setup file.