Filter
Top Products
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
44
ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN
■ Windows® only cautions
● Uninstall
• Uninstallation deletes only those files created and copied during installation. Files (fold-
ers, setup files, log files) created after installation by the user and/or ETERNUSmgr are
not deleted. After uninstalling ETERNUSmgr, any remaining files and folders should be
deleted manually. Be careful not to delete folders and files necessary for other software.
• After uninstalling ETERNUSmgr, if you delete or change the name of the original installa-
tion directory, a "This may have an effect on the registered application. Are you sure you
want to continue?" message will appear. If uninstallation has completed normally, this will
not be a problem.
● Various settings
• Windows® 2000, Windows Server® 2003, and Windows Server® 2003 R2 have an
energy saving mode, but since the ETERNUSmgr monitoring functions are inoperative
when the OS is suspended or sleeping, use of this mode should be avoided.
• With a GRmgr V10L30 or V10L40 setup file, the following parameter descriptions must be
added before the E-mail notification function (available from GRmgr V10L50) can be used
by ETERNUSmgr:
- # Admin Mail Address
ADMIN_MAIL = (Admin Mail Address)
- # Mail Server Address
ADMIN_MAILSV = (Mail Server Address)
- # Mail Server SMTP Port
SMTP_PORT = (Mail Server SMTP Port)
These additions are not necessary if the E-mail notification function is not used.
For details on the above parameters, see "
Admin Mail Address" (page 15) and "Mail Server
Address (ETERNUSmgr for Windows® only)" (page 16).
• The Mail Server SMTP Port description must be added when the SMTP port No. is other
than the default (25). For details on the above parameters, see "
Mail Server SMTP Port
(ETERNUSmgr for Windows“ only)" (page 16).