Fujitsu RX200 Server User Manual


 
Options Guide 3
Preface Extensions and conversions
1.2 Extensions and conversions
Second processor
The system board can be upgraded with a second processor. Only processors
of the same type may be used on the system board. The second processor must
have the same clock frequency as the first processor.
Extension of the main memory
The eight slots for the main memory are suitable for PC2-3200 DDR DIMM
memory modules. Their organization in four memory banks, 0 to 3, allows fast
memory access with two-way interleaving.
Memory modules must always be installed in pairs. A memory bank must
always be fully equipped and with the same type of memory modules.
Additional accessible drives
The accessible drives available are a floppy disk drive and a CD-ROM/DVD
drive. The drives can be installed in the two top bays. The left-hand bay is
intended for a 3.5 x 0.5 inch floppy drive or a LocalView module, while the right-
hand bay takes a 5.25 x 0.5 inch CD-ROM/DVD drive.
LocalView module (alphanumeric system display)
The LocalView module gives you the option of displaying system information
and hardware system faults alphanumerically. This is an intelligent module with
a microcontroller and its own memory, which functions independently of the
server system.
The LocalView module consists of an LCD display panel and a toggle switch,
both accommodated in a suitable mount. The mechanism used allows the LCD
display panel to be pulled out and opened out.
For more information on operation and display modes, see the documentation
for the LocalView module [6].