Filter
Top Products
Options Guide 23
Processors Installing a second processor
Installing the heat sink
Figure 10: Installing the heat sink
Ê Fit the heat sink on the processor such that the side labeled “FRONT” (see
arrow (1) in figure above) is facing the front of the server.
Ê Attach the heat sink with four screws. Tighten the screws in diagonally
opposite sequence (2).
V CAUTION!
Never install a processor without a heat sink! The processor is likely to
overheat, which may cause damage to the processor and the system
board.
Installing the ventilation duct
Ê Reinstall the ventilation duct (see page 20).
Ê Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45.
2
1