Filter
Top Products
Options Guide 39
8 Controllers in Non-Hot-Plug PCI
Slots
V CAUTION!
Please observe the safety information in the chapter “Safety Instructions”
on page 9ff.
If you want to replace components which are not hot-pluggable, you must
proceed as follows:
Ê Shut down the operating system
Ê Switch off the server, and
Ê Unplug the power plugs.
The system board contains two PCI-X slots, which can only be used via a riser
card because of the height of the server:
– PCI-X slot 1: 64 bit/133 MHz, max. length 315 mm
– PCI-X slot 2: 64 bit/66 MHz, low profile, max. length 175 mm
I Both slots are not hot-pluggable.