Fujitsu RX200 Server User Manual


 
Options Guide 7
2Procedure
V CAUTION!
The actions described in this manual should only be performed by
engineers, service personnel or technical specialists.
Equipment repairs should only be performed by authorized, qualified
staff.
Any failure to observe the guidelines in this manual, and any unautho-
rized openings and improper repairs could expose the user to risks
(e.g. electric shock, fire hazards) and could also damage the
equipment.
Please note that any unauthorized opening of the device will result in
the invalidation of the warranty and exclusion from all liability.
Ê First of all please familiarize yourself with the safety instructions in the
chapter “Safety Instructions” on page 9ff.
Ê Make sure that all required manuals (see “Additional documentation about
the server” on page 1) are available, printing out the PDF files if necessary.
You will definitely need
the Operating Manual for the server and
the Service Supplement for the server
the Technical Manual for the system board.
Ê Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the chapter “Preparation” on page 15ff.
Ê Extend or upgrade your server as described in the relevant chapter.
I How to install/remove the hot-plug components is described in the
Operating Manual for the server.
Ê Close the server, plug all mains plugs into the power outlets, and switch on
the server as described in the chapter “Completion” on page 45ff.
Ê Start the operating system and, if necessary, configure it as required (see
the Operating Manual).