Filter
Top Products
Options Guide 31
Accessible Drives Installing the LocalView Module
Ê Remove the dummy cover with a screwdriver.
V CAUTION!
Keep the dummy cover for future use. If you remove the LocalView
module without installing a new one, you must reinstall the dummy
cover to comply with EMC regulations and to satisfy cooling require-
ments and fire protection measures.
Ê Push the LocalView module into its bay until it engages.
Figure 15: Connecting the LocalView module
Ê Connect the CN6 plug of the SCSI/fan board (see figure) using the IPMB
cable with the connector on the rear of the LocalView module.
Ê Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45.
I For information on operation and display modes, see the user documen-
tation for the LocalView module [6].