Filter
Top Products
Options Guide 45
10 Completion
V CAUTION!
Please observe the safety information in the chapter “Safety Instructions”
on page 9ff.
10.1 Closing the server
Figure 25: Installing the cover
Ê Position the cover in such a way that the rear edge protrudes 3-4 cm from
the housing.
Ê Push the cover to the front as far as it will go.
Ê Attach the cover with the knurled screw (see circle in figure) at the back of
the housing.
Ê Install the server in the rack.
I How to install the server in the rack is described in the operating
manual.