Filter
Top Products
18 Options Guide
Upgrading / exchanging main memory Main Memory
5.2 Upgrading / exchanging main memory
Ê Open the server as described in the chapter “Preparation” on page 15f.
Figure 4: Removing a memory module
Ê Flip the ejector tabs on each side of the slot outward (1). This levers an
installed memory module out of its slot.
Ê Remove the memory module from the slot (2).
Figure 5: Installing a memory module
Ê Carefully press the memory module into the slot (1) until the ejector tabs on
both sides of it engage (2).
Ê Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45f.
1
1
2
2
2