Filter
Top Products
26 Options Guide
Exchanging the processor Processors
Ê Apply a small amount of thermal paste to the top of the new processor.
Ê Spread the paste thinly and evenly.
Ê Fit the heat sink on the processor such that the side labeled “FRONT” is
facing the front of the server (see page 23).
Ê Attach the heat sink with four screws. Tighten the screws in diagonally
opposite sequence (see page 23).
Ê Reinstall the ventilation duct (see page 20).
Ê Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45.