Filter
Top Products
Options Guide 41
Controllers in Non-Hot-Plug PCI Slots Installing controllers
Figure 23: Mounting the board
Ê Plug the board into the PCI slot on the riser card that is suitable for the height
of the board.
I Make sure that the slot cover fits into the appropriate recess.
Ê If necessary, plug in the cables on the board and other components.
Reinstalling the riser card holder
Ê Plug the riser card holder into the system board.
Ê Attach the riser card holder to the rear of the housing with two knurled
screws (see page 40).
Ê Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45f.
Low-profile slot (#2)