171
16-bit Proprietary F
2
MC-16L/16LX/16F Family
Support Tools
F
2
MC
-
16L/LX/F Family
Support tools
■
Support Board for the F
2
MC-16LX Family
• Evaluation of the F
2
MC-16LX Family can be
performed in both single chip and external bus
modes using the MB2141B emulator/debugger.
• User specific hardware circuits can be incorporated
via the connectors on the support board.
• The configuration when used with the MB2141B
emulator/debugger is:
MB2141B + MB2145-507 + Evaluation device(MB90V550A) +
MB2132-457 + support boad
• Support board for connection
• Specifications of support board (mother board)
Compatible MCU Support board(mother board) Daughter board Hardware configuration
F
2
MC-16LX family
MB90550A
MB2176-01E
(AC adapter is not attached)
MB2176-10
FLASH memory
SRAM
LED
RS-232C connector
I/O connector
Item Description Remarks
MCU
F
2
MC-16LX family MB90550A
-
Memory
Flash memory : 1MB 256 K × 16 × 2
SRAM : 256KB 128 K × 8 × 2
EEPROM : 1024 bits 1 K × 1 × 1
Connector
96-pin DIN connector × 2 For connection to daughter board
D-SUB 25 pins × 2 External UART × 1, UART for internal MCU × 1
96-pin half pitch × 2 For extension bus
Switch
Rotary switch × 12 For memory bank select
8-bit DIP switch × 2 For functional switching
Push switch × 2 For Reset/external interrupt
Slide switch x 1 For turning on power
Buzzer Separate excitation type × 1 Connect to reload timer output
LED Status display Orange × 1, Red × 1, Green × 1 Settable for enable/disable for green/red LEDs
Land Signal line monitor land Available for each signal line
Power supply Supplied by AC adapter Generated for +5V, +3V, being on-board regulated
Daughter board
IC socket
Support board (mother board)
Extension connector
User specific hardware circuit
(including I/O board etc.)
DC jack
RS232C connector
To PC
Connect AC adapter