Filter
Top Products
71
8-bit Proprietary F
2
MC-8L Family
Support Tools
F
2
MC-8LFamily
Support tools
*1 : Includes one Q-pack for QFP-80 (model : TQPACK080RA: made by Tokyo Eletech Ltd.)
Note : Care is required in printed circuit board pattern design because the position of the board connector part (the flat section
at the pin tips) of the Q-pack differs from the mass production product package (the Q-pack pins are shifted a few milli-
meters inwards).
Includes one Q-socket for QFP-80 (model : TQSOCKET080RAG: made by Tokyo Eletech Ltd.)
*2 : Includes one Q-pack for QFP-64 (model : TQPACK064RZ: made by Tokyo Eletech Ltd.)
Note : Care is required in printed circuit board pattern design because the position of the board connector part (the flat section
at the pin tips) of the Q-pack differs from the mass production product package (the Q-pack pins are shifted a few milli-
meters inwards).
Includes one Q-socket for QFP-64 (model : TQSOCKET064RZG: made by Tokyo Eletech Ltd.)
*3 : Includes one IC socket for SH-DIP-64 (model : IC83-64075-GS4: made by Yamaichi Electronics Inc.)
*4 : Includes one Q-pack for LQFP-64 (model : TQPACK064SD : made by Tokyo Eletech Ltd.)
Note : Care is required in printed circuit board pattern design because the size of the foot pattern of the Q-pack differs from the
mass production product package (the Q-pack pins are shifted a few millimeters inwards).
Includes one Q-socket for LQFP-64 (model : TQSOCKET064SDW : made by Tokyo Eletech Ltd.)
*5 : Includes one Q-pack for QFP-64 (model : TQPACK064SA : made by Tokyo Eletech Ltd.)
Includes one Q-socket for QFP-64 (model : TQSOCKET064SAW : made by Tokyo Eletech Ltd.)
Note : Care is required in printed circuit board pattern design because the size of the foot pattern of the Q-pack differs from
the mass production product package (the Q-pack pins are shifted a few millimeters inwards).
*6 : Interchangeability to MB2114-505.
Name Part number Remarks
Main unit MB2141B
For the F
2
MC-8L family
Power supply voltage : 100 V or 200 V.
Host I/F : RS-232C(115 Kbps) ) , LAN (10BASE-T)
Dimensions : W210 × D297 × H77 mm
Weight : 2.9 kg
Includes : manual
Emulation pod *
6
MB2144-508
For the F
2
MC-8L family
Dimensions :158mm(with) × 126mm(depth) × 38mm(height),
Weight : 0.5kg
Includes : simple target (MB89T625) , manual
Piggyback/evalua-
tion (PV) probe
cable
MB2144-201 For DIP-28, piggyback/evaluation package: MDIP-64C-P02
MB2144-202
For LCC-32 rectangular, piggyback/evaluation package: MQP-64C-P01,
MQP-80C-P01, MQP-100C-P02
MB2144-203
For LCC-32 square, piggyback/evaluation package: MQP-48C-P01,
MQP-100C-P02
One-time evalua-
tion probe cable
MB2144-210A
or
MB2144-220
Use in conjunction with the probe header for each product type.
One-time evalua-
tion probe header
MB2144-211-01A *
1
For the MB89860 series (QFP-80), standard options are mounted on MB89P867
MB2144-212-01A *
3
For the MB89850 series (SH-DIP-64), standard options are mounted on MB89P857
MB2144-214-01A *
2
For the MB89810A series (QFP-64), default options are mounted on MB89P817A
MB2144-215-01 *
2
For the MB89660 series (QFP-64), default options are mounted on MB89P665
MB2144-216-01 *
3
For the MB89660 series (SH-DIP-64), default options are mounted on MB89P665
MB2144-217-01 *
4
For the MB89P585B (LQFP-64), default options are mounted on MB89P585B
MB2144-218-01 *
5
For the MB89R905 (QFP-48) ,FPT-48P-M16 (0.8 mm pitch, 12 × 12 mm)
MB2144-224-01 *
7
For the MB89P589B (LQFP-64), default options are mounted on MB89P589B
MB2144-225-01 *
4
For the MB89P585BW (LQFP-64) , default options are mounted on MB89P585BW
MB2144-226-01 *
8
For the MB89R907A (QFP-48), FPT-48P-M13 (0.8 mm pitch, 10 × 10 mm)