Filter
Top Products
28 SPARC Enterprise T5440 Server Administration Guide • July 2009
▼ Log In to ILOM
This procedure assumes the default configuration of the service processor as
described in your server’s installation guide.
● Open an SSH session and connect to the service processor by specifying its IP
address.
The ILOM default username is root and the default password is changeme.
You are now logged into ILOM. Perform tasks as needed.
For more information about ILOM, refer to the ILOM’s user’s guide and the
ILOM supplement for your server.
Note – In order to provide optimum system security, change the default system
password.
▼ Display System Faults
1. Log in to ILOM.
See “Log In to ILOM” on page 28.
% ssh root@xxx.xxx.xxx.xxx
...
Are you sure you want to continue connecting (yes/no) ? yes
...
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Integrated Lights Out Manager
Version 2.0.0.0
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
->