Filter
Top Products
Use Logical Domains Software 39
Logical Domain Configurations
The Logical Domain configurations are stored on the service processor (SP). Using
Logical Domains Manager CLI commands, you can add a configuration, specify a
configuration to be used, and list the configurations on the service processor. You can
also use the ILOM set /HOST/bootmode config=configfile command to specify an
LDoms boot configuration. For further information about /HOST/bootmode, see
your server’s ILOM supplement.
Logical Domains Software Requirements
The following software is required or recommended for LDoms on the SPARC
Enterprise T5440 server:
■ (Required) Solaris 10 11/06 OS – Refer to the Solaris 10 Collection for more
information.
■ (Required) Solaris 10 11/06 OS patches:
■ 124921-02, which contains updates to the Logical Domains 1.0 drivers and
utilities. Logical Domains networking will be broken without this patch.
■ 125043-01, which contains updates to the console (qcn) drivers. This patch
depends on KU 118833-36, so if this is not already updated on your system, you
will need to do so.
For further information about patches, see the product notes for your server.
■ (Required) System firmware version 6.4.x – Refer to your server’s documentation
for more information.
■ (Required) Logical Domains Manager 1.0.x software.
■ (Recommended) Solaris Security Toolkit 4.2 software – Refer to the Solaris Security
Toolkit 4.2 Administration Guide and Solaris Security Toolkit 4.2 Reference
Manual for more information
Note – During the boot process, domains that use virtual boot devices must wait for
their service domains to come online first. This can prolong the boot process.